Latest News
Wrapping Bar Tape on an Integrated Cockpit
Check Cable Exit Ports First: Locate all internal routing ports near the drops and stem before wrapping; covering them impairs...
Cleat Setup and Knee Pain: A Step-by-Step Method
Isolate Your Symptoms: Anterior knee pain points to fore/aft positioning (foot too far forward over pedal axle); medial/lateral pain typically...
Saddle Height and Setback Without a Fit Studio
The Inseam Foundation: Accurately measuring your inseam using a hardback book provides the core metric required for both the LeMond...
Climbing Technique: Cadence, Gearing, Seated vs Standing
Target 65–85 RPM: Spinning a moderate cadence balances neuromuscular fatigue and cardiovascular effort; don't force a flat-road 90+ RPM uphill...
Descending Technique: Body Position, Braking Points, Cornering Lines
Weight Low & Back: Shift your hips toward the back of the saddle, drop your heels, and hold the drops...
Wet-Weather Braking on Carbon Disc Wheels
Wet disc braking is limited by tyre grip, not brake power. Rain cuts your tyre traction roughly in half, doubling...
Off-Season Storage: Putting a Carbon Bike Away for Three Months
Most of that is achievable in most homes without a dedicated bike room. A spare bedroom, a dry basement, or...
The 5-Minute Pre-Ride Check for a Self-Built Carbon Bike
A pre-ride check is a fixed sequence you run before every ride, or at minimum before every ride following a...
