Check Cable Exit Ports First: Locate all internal routing ports near the drops and stem before wrapping; covering them impairs cable function and mechanical serviceability.

Account for Aero Profiles: Integrated cockpits feature wider cross-sections that consume more tape; choose longer rolls to ensure full coverage.

Master the Lever Figure-8: Wrap in the direction that tightens under hand pressure, using a precise figure-8 around the hood clamp to conceal hardware while keeping clamp bolts accessible.

Finish Short of the Stem: End the wrap 5–10 mm short of the stem faceplate transition to prevent lifting on flared carbon surfaces.

Observe Torque Limits: Always secure expansion bar-end plugs to the printed specification (typically 3–5 Nm) using a torque wrench to protect carbon wall integrity.